Dental veneer than color

Colorimetric color is always an important topic in dental restoration. To make an ideal tooth color choice, need the dentist's standard, a standard color plate, but also need experienced porcelain technicians. In the process of colorimetric base teeth, the dentist should pay attention to the following details to avoid colorimetric error.

 Colorimetric precautions:

▊ To use natural light color ▊

It is best to compare colors in a good light time

Do not use light as far as possible also do not be in the dark when the color, natural light (solar light) with the light of the light of the object is different, color has difference, color should be given priority to with natural light.

 Do not have too bright color items next to the patient's face, which will cause an impact. Color to concentrate, the color of the plate body to be as close as possible to the solid teeth. The refraction effect of such teeth on the light is more consistent.

 The first impression is very important, can pay special attention to the first color of the comparison, the color of the gums, to prevent the red shadow of the gums to the teeth caused color distortion (generally not obvious) and then first compare the color in the middle of the teeth more similar, and then compare the neck. Then compare the color of the cut end, and compare the tooth with the same position on the other side. After satisfaction to see if this color in the dentition will be coordinated, can not be unique, and then observe the near the effect is satisfactory and then see the effect of the distance.

▊ Don't just compare it to one color, ▊

After the color is better, you can wait a while later and compare it again

In the teeth are not available, than the color, after the teeth are ready, if the color is not correct before, it is best to let the eyes rest for a few minutes to compare again. Close your eyes for a minute or ten seconds after looking at, work for a long time, eyes will fatigue color difference. Sometimes even oneself also don't know or let others refer to it.

 When choosing color, it is best to take a small mirror to let the patient see, ask for the patient's opinion: to choose which color level, take out two or three more close to the color to let the patient choose to determine, the original color of everyone's own oral teeth is not exactly the same. If it is the dentist as long as there is a little color difference, the patient may not be satisfied, so the doctor will blame the doctor. If the patient chooses it by himself, even if there is a little error, there will be no objection, because the patient thinks that this is the color he chooses.

▊ The tooth preparation must be standard ▊

There should be enough gaps for your teeth

The gap is the fundamental source of many problems, of course, regular hospitals or clinics are generally more standard dental preparation, some clinics doctors will be relatively random point, the rework rate will be more.

 Dentists usually is to protect their eyes, eyes if not good, color is not allowed, so usually to see some green, long time on the Internet can be the computer screen dark, supplement some vitamin A is good for protecting eyesight.

▊ The medical advice on the mechanic list should be written in a clear and detailed way ▊

Try to be as specific as possible

The mechanic did not see the patient's solid teeth, are relying on experience, with the mechanic list to control, so the mechanic list order as far as possible to write more. So a tooth body cut too much or too little in the pile of porcelain color production because of the thickness of the porcelain powder is different may be caused by the color difference can also be appropriately indicated. This can let the factory technicians at a glance.

▊ Find a reputable processing plant, ▊

For the patient is good for you

Again famous large processing plants will also have rework, but relatively few. Reworks are mostly novice "masterpiece", many people only notice how to avoid mistakes, but forget the processing plant here. Sometimes it's not because the doctor looks bad. If the patient is not satisfied with the repair, it may also be the processing plant mechanic stacking porcelain coloring technology. So when you have time to keep in touch with the processing plant and listen to their suggestions and opinions. It avoids some trouble for the dentist and is also a responsible manifestation for the patient.